Icom MarineComander MXS-5000 Instruction Manual page 6

1
BASIC OPERATION
D Display
q
q DATA-BAR
Shows various information on palettes 1 to 4.
• A total of 20 options are selectable.
The Selectable options are Date/Time, Position, COG/
SOG, COG, SOG, Heading/STW, Heading, STW, Depth/
Temp., Depth, Temp., Trip Log, Waypoint, XTE, ETA/
TTG, ETA, TTG, Cursor, Startus and Wind.
w PALETTE1
Shows various information.
(Default: Position)
Shows the current position data* in latitude/longi-
tude.
* Depending on the presetting, Loran-C Time differences
are displayed instead of the position data.
• When the position data is invalid, the position data is
shown in red for 1 minute. After 1 minute has passed,
"–––" (invalid data) will appear.
e PALETTE2
Shows various information.
(Default: COG)
Shows your vessel's course over ground.
• "T" shows true north bearing, and "M" shows magnetic
north bearing.
w e r
r PALETTE3
Shows various information.
(Default: SOG)
Shows your vessel's speed over ground.
If no speed data is found,
t PALETTE4
Shows various information.
(Default: Depth)
Shows the current depth of the sea bottom, under
the vessel.
When a companion Icom fish finder is not connected
to the main unit, or the sea bottom is not detected,
"–––" (invalid data) will appear.
y CROSS HAIR CURSOR
Appears and moves on the screen when [Ù], [Ú],
[Ω] or [≈] is pushed.
1-4
t
Move the cursor on
the screen,
push [SUB] to toggle
between minimize or
original.
y
"–––" will appear.
then