Icom MarineComander MXS-5000 Instruction Manual page 172

5
COMMON SETTING
Tool (MENU w Tool)
■
D GPS Status (Continued)
<GPS Setup menu>
• GPS Setup screen
• Setup...
(MENU w Tool u GPS u Setup)
NOTE: This setting takes effect for only MXG-5000,
connected to the port1.
When the GPS Setup screen is displayed, rotate
q
[DIAL] until the desired menu is highlighted, then
push [ENTER].
Rotate [DIAL] to set the desired option, then push
w
[ENTER].
e Rotate [DIAL] to select "Save," then push [ENTER]
to set and return to the previous screen.
• If "Cancel" is selected, the setting will be cancelled.
• GPS Setup—Datum
The GPS geodetic reference can be changed from the
list.
• GPS Setup—Preset Position
Your roughly position (latitude and longitude) can be
preprogrammed to make easy to find your position af-
ter resetting the GPS.
• GPS Setup—Position Smoothing
Set the position smoothing interval time to between 0
and 9 in 1 digit step. (Unit: second)
• 0 : The position data is displayed in real time.
• 1 to 9 : Set the smoothing level. The higher setting
more smoothes the raw data. If the setting is
too high, the response time will be too long.
• GPS Setup—SPD/CSE Smoothing
Set the SPD and CSE smoothing interval time to be-
tween 0 and 9 in 1 digit step. (Unit: second)
• 0 : The SOG and COG data are displayed in real
time.
• 1 to 9 : Set the smoothing level. The higher setting
more smoothes the raw data. If the setting is
too high, the response to speed and course
will be too long.
• GPS Setup—Latitude Offset
Set the latitude offset value.
The latitude data shifts this set value from the current
position.
• GPS Setup—Longitude Offset
Set the longitude offset value.
The longitude data shifts this set value from the cur-
rent position.
5-26