Removing The Panel Unit Assembly - MUTOH Rockhopper II series Maintenance Manual

4.2.6. Removing the panel unit assembly

Step 1 :
Remove side cover R.
Step 2 :
Remove the panel tape power cord.
Step 3 :
Remove the 4 screws fixing the panel base.
1 = Panel unit assembly
3 = Tape wire
Step 4 :
Remove the panel unit assembly.
Step 5 :
Remove the 6 screws fixing the panel board assembly and the panel cover.
1 = Screws (M3x8) fixing the panel cover
Step 6 :
Remove the panel cover.
Step 7 :
Remove the 4 screws fixing the panel bracket and the panel board assembly.
1 = Screws (M3x8) fixing the panel board assembly
Step 8 :
Replace the panel board assembly.
Step 9 :
Reinstall all parts in the opposite order of the removal procedure.
Rockhopper II series printers – Maintenance Manual
2 = Screws (M3x6) fixing the panel unit assembly
47 AP-74065, Rev. 1.2, 27/09/04