Setting Up The Unit - MUTOH Viper TX Operation Instructions Manual

•
Before alignment of the UW/W 100, please make sure the printer is placed level!
•
It is important that the UW/W 100 is perfectly lined out.
•
Make sure the box is as close as possible to the installation location to avoid unnecessary
transportation of the unpacked printer.
Downloaded From ManualsPrinter.com Manuals
Caution
Starting point : Unpacked items
Step
1 Unpacking
2 Verifying the packaged items
3 Choosing a place for the printer
4 Transfer and Transportation
5 Installing the printer
6 Calibrating the Winder system
7 Connecting the printer
8 Connecting the cables of the winding system
Result : FULLY INSTALLED VIPER TX

3 SETTING UP THE UNIT

↓
Action
↓
21
Viper TX – Operation Instructions
AP-75710, Rev. 1.1, 09/01/2008