MUTOH Rockhopper II series Maintenance Manual page 243

Step 3 :
Insert into the waste fluid tubes from the pumps a piece of tube (DF-43951; 15 cm).
Step 4 :
Bundle the waste fluid tubes in the large waste fluid tube.
Step 5 :
Bundle the connectors together in the locking wire saddle.
Step 6 :
Bundle the remaining tubes, cables and connectors together in the manner shown in the figure
below.
Rockhopper II series printers – Maintenance Manual
1 = piece of tube (15 cm)
1 = large waste fluid tube
244 AP-74065, Rev. 1.2, 27/09/04