MUTOH Rockhopper II series Maintenance Manual page 157

Notes :
8B 8A 7B
Adjustable head slant
No.
1 Angle adjustment screw
Step 6 :
Tighten the screw fixing the head stationary plate.
Repeat step 1 to 6 until the adjustment is correct for all heads.
When printing the pattern, the head identifications 1A, 1B etc, are not printed.
Analyse the pattern as shown below. Be sure to have five lines for each color.
7A 6B 6A 5B
Part
Rockhopper II series printers – Maintenance Manual
5A 4B 4A 2B
Adjusted head slant
158
2A 1B 1A 3B
AP-74065, Rev. 1.2, 27/09/04
3A