Replacing The Slide Motor Assembly (Wiper Arm) - MUTOH Rockhopper II series Maintenance Manual

4.8.3. Replacing the SLIDE motor assembly (wiper arm)

Caution :
The motor is hot after the product has been operated, so be careful not to burn yourself.
Step 1 :
Follow the instructions in "Replacing the maintenance assembly" to remove the maintenance
assembly.
Step 2 :
Remove the 2 screws fixing the SLIDE motor assembly.
1 = SLIDE motor assembly
Step 3 :
Replace the SLIDE motor assembly.
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
Rockhopper II series printers – Maintenance Manual
2 = Screws (M3x6) fixing the SLIDE motor assembly
118 AP-74065, Rev. 1.2, 27/09/04