MUTOH Rockhopper II series Maintenance Manual page 281

16 E 016 error
CPU Err [15]
17 E 016 error
CPU Err [22]
18 E 016 error
CPU Err [32]
19 E 016 error
CPU Err [33]
Notes :
(2) Mechanical system critical errors
No. Message
1 E065 error PF
motor
2 E067 error
Paper feed
encoder
3 E069 error
Paper feed
timeout
Floating point
exception error :
trouble occurred in
the floating points
Watch exception
error : trouble
occurred in the
watch.
Watch dog timeout
exception error :
watch dog time out
occurred.
Abort error : Aborts
occurred
For the settings on a computer, refer to the computer's operation manual.
Phenomenon
Trouble occurred in
the PF motor (X-
axis) during
operation.
Displayed when the
motor commended
value and feedback
from the encoder
are significantly
different.
Trouble occurred on
paper travel (x-axis)
during operation.
Displayed when
there is no feedback
from the encoder.
Timeout occurred
on paper travel (X-
axis) during
operation.
Displayed when the
pressure roller has
not reached the
commanded
position.
Rockhopper II series printers – Maintenance Manual
Check point Action
(1) Check error
history from "Test:
history" of self-
diagnosis function.
(2) Set endurance • Check
running cycles to connection of
50 or more from following
"Life: PF motor " of connectors in
self-diagnosis Mainboard
function and check assembly:
if X-axis motor → PF motor cable
error is issued.
assembly
connector J157
→ PF_ENC
assembly
connector J154
(3) Check
"Encoder:PF"
under "Test:
Encoder" of self-
diagnosis function.
282
Refer to
→ History menu
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Encoder Menu
AP-74065, Rev. 1.2, 27/09/04