MUTOH Rockhopper II series Maintenance Manual page 50

Step 7 :
Remove the screws from the front of front media guide.
Notes :
1 = Screws on the front of front media guide
1 = Screws on the front of front media guide
Step 8 :
Standing before the unit move the front paper guide towards you.
Step 9 :
Loosen the cables from their cable clamps.
Step 10 :
Carefully loosen the connectors
Notes :
Step 11 :
Remove the front paper guide.
Step 12 :
Replace the parts inside the printer.
Step 13 :
Reinstall all parts in the opposite order of the removal procedure.
Please note that the amount of screws is size dependent.
Rockhopper II 2 heater
Rockhopper II 4 heater
Be sure not to damage the cables or connectors.
Rockhopper II series printers – Maintenance Manual
51 AP-74065, Rev. 1.2, 27/09/04