MUTOH Rockhopper II series Maintenance Manual page 42

Step 4 :
Remove the 4 bolts and cover nut from the front and back of the inner surface on the bottom of
side cover L.
1 = Hexagon socket head cap screws (M4x16)
Step 5 :
Remove the 6 bolts from the front and back of the bottom surface on the bottom of side cover L.
1 = Hexagon socket head cap screws (M5x18)
Step 6 :
Remove the bottom of side cover L.
Step 7 :
Replace the parts inside the printer.
Step 8 :
Reinstall all parts in the opposite order of the removal procedure.
Rockhopper II series printers – Maintenance Manual
2 = Cover nut
43 AP-74065, Rev. 1.2, 27/09/04