Adjustment Menu - MUTOH Rockhopper II series Maintenance Manual

5.5. ADJUSTMENT MENU

In this menu, you can align the printing position and correct the media feed operation.
The Adjustment menu includes following diagnosis menus :
Initialization item
Skew check
Head rank input
Head nozzle check
Head angle check
Repeatability
adjustment
CW adjustment
Band feed correction
Top & bottom
adjustment
P_REAR sensor
position adjustment
Test Print
Head Wash
Software counter
initialization
Feed amount check
Fill pattern
Description
In this menu, you can perform media feed and check
the degree of skew in the media feed operation by
means of the sensors.
Inputs the characteristic value of the installed print
head. Ink is replenished after this input.
Prints out a printing to check the ink discharge
performance of the head nozzles.
Prints out a print to check for printer head slant.
Mechanical adjustment should be performed as
necessary.
Prints out a print to align the two-way printing
position.
Prints out a print to adjust any gaps between the
heads.
Prints out a print to correct the media feed amount
for each pass.
Sets the top and bottom margins.
Adjusts the position of the P_REAR sensor using
sheet media.
Prints out a nozzle check pattern and the adjustment
variables.
Cleans the tubes and heads using cleaning fluid.
Clears various software counters.
Used to check the media feed amount for one band.
A fill printing pattern is printed by both ends of the
head.
* Adj *
F1 → CheckSkew
F3 → ChkNozzle
* Adj *
F1 → Bi-D
F3 → Feed Adj.
* Adj *
F1 →
R. Sns. Pos.
F3 → CleanHead
* Adj *
F1 →
SendPitch
F3 →
FillPattern
Rockhopper II series printers – Maintenance Manual
Input Rank
HeadSlant
(1/4)
Uni-D
Top&Bottom
(2/4)
TestPrint
CountClear
(3/4)
(4/4)
150
Refer to
Skew Check Menu
Head rank input menu
Head Nozzle Check Menu
Head Slant Check Menu
Repeatability Adjustment
Menu
CW Adjustment Menu
Band Feed Correction
Menu (X Length)
Top & bottom adjustment
menu
P_REAR sensor position
adjustment menu
Test print menu
Head wash menu
Software Counter
Initialization Menu
Feed Pitch Check Menu
Fill printing menu
← F2
← F4
← F2
← F4
← F2
← F4
AP-74065, Rev. 1.2, 27/09/04