Step 6 :
Insert in the waste fluid tubes from the pumps a piece of 15 cm tube (DF-43951).
Step 7 :
Stick the locking wire saddle onto side plate F.
Step 8 :
Bundle the tubes and connectors together in the locking wire saddle.
Step 9 :
Bundle the waste fluid tubes in the large waste fluid tube.
Step 10 :
Bundle the remaining tubes, cables and connectors together in the manner shown in the figure
below.
Rockhopper II series printers – Maintenance Manual
1 = piece of tube (15 cm)
1 = large waste fluid tube
247
AP-74065, Rev. 1.2, 27/09/04