MUTOH Rockhopper II series Maintenance Manual page 307

22 Inaccurate squareness
23 Abnormal discharge occurs.
Rockhopper II series printers – Maintenance Manual
(1) Check the
installation method
of the paper.
(2) Check the
rotation of the
pressure roller with
the pressure arm at
the raised position.
(3) Check the grid
roller for rugged
movement. Also,
check the rotary
movement for
irregularities.
(1) Check if the two
head tape power
cables stick
together.
(2) Make sure that
the CR tape power
cables are bundled
correctly.
308
Setup the paper
according to the
User's Guide.
• If the surrounding
area of the pressure
roller is
contaminated by
paper dust and
waste paper, wipe it
with a soft
dampened cloth.
• If the surrounding
area of the pressure
roller is
contaminated by
paper dust and
waste paper, wipe it
with a soft
dampened cloth.
• The cores of the
head tape power
cables should be
aligned for each
head and taped
together with
double-sided tape.
• Bundle the CR
tape power cables
so that they do not
move.
AP-74065, Rev. 1.2, 27/09/04
→ User's Guide
→ User's Guide
→ User's Guide
→ Replacing the
print head assembly
and head tape
power cable.
→ Replacing the
steel bearer, tube
guide, CR tape
power cable and ink
tube.