Machine Size Select Menu - MUTOH Rockhopper II series Maintenance Manual

5.13. MACHINE SIZE SELECT MENU

This section describes the select menu of the machine size.
Used when the Mainboard is exchanged, etc.
Step 1 :
If the system is in the operation mode or the self-diagnosis menu mode, press the [POWER] key
to power off the unit.
Step 2 : Press the [POWER] key while simultaneously pressing and holding the [MENU ↑] key and the
[MENU ↓] key.
Step 3 :
Select the machine size.
* MachinSize *
F1 →
50inch
F3 →
87inch
- 64inch -
Select Finish !
Please re-starting
Step 4 :
Power OFF the unit.
Rockhopper II series printers – Maintenance Manual
← F2
64inch
(1/1)
↓ Select item
201 AP-74065, Rev. 1.2, 27/09/04