MUTOH Rockhopper II series Maintenance Manual page 288

18 E 082 Error
Wiper Sensor
Trouble occurred in
the wiper sensor.
Rockhopper II series printers – Maintenance Manual
(2) Is the • If the
transmission transmission
photosensor at the photosensor is
cap securely detached, fix it
installed? securely.
(3) Is the sensor • Clean the sensor
element of the element using
transmission cotton swabs.
photosensor at the
cap contaminated?
(4) Is the • Securely connect
transmission the cable for the
photosensor cable transmission
at the lever motor photosensor cable
securely installed? to Mainboard
assembly
connectors J123
and J124.
(5) Make sure that • Replace the
the connections of SLIDE motor
the SLIDE motor assembly for the
assembly for maintenance U/D.
maintenance U/D
are good.
(6) The Mainboard • Replace the
assembly may be Mainboard
damaged. assembly.
(1) Check the • Replace the
up/down operation transmission
of he cap (wiper) photosensor at the
via "Sensor: Head wiper.
Lock" of the self-
diagnostic
function.
(2) Is the • If the
transmission transmission
photosensor at the photosensor is
wiper up/down detached, fix it
area securely securely.
installed?
(3) Is the sensor • Clean the sensor
element of the element using
transmission cotton swabs.
photosensor
contaminated?
(4) Is the • Securely connect
transmission the cable for the
photosensor cable transmission
securely photosensor cable
connected? to Mainboard
assembly
connector J131.
289
→ Replacing the
transmission
photosensor.
→ Replacing the
transmission
photosensor.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Replacing the
SLIDE motor
assembly (wiper
arm).
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Replacing the
transmission
photosensor.
→ Replacing the
transmission
photosensor.
→ Replacing the
transmission
photosensor.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
AP-74065, Rev. 1.2, 27/09/04