MUTOH Rockhopper II series Maintenance Manual page 86

Step 4 :
Remove the 2 screws fixing the steel belt.
1 = Screws fixing the steel belt
Step 5 :
Replace the steel belt.
Notes :
Step 6 :
Reinstall all parts in the opposite order of the removal procedure.
Step 7 :
Perform steel belt tension adjustment according to "Steel belt tension adjustment".
Be careful when handling the steel belt. The steel belt may be cut off when
accreting dust to it or creasing it.
Rockhopper II series printers – Maintenance Manual
2 = Steel belt
87 AP-74065, Rev. 1.2, 27/09/04