Jig And Tool List; Required Tools - MUTOH Rockhopper II series Maintenance Manual

8.5. JIG AND TOOL LIST

This section provides lists of jigs and tools required for service operations.

8.5.1. Required Tools

(1) Tools for part replacement
No. Name
1 Philips driver No.2
2 Philips driver No.2
3 Philips driver No.1
4 Flat-head driver
5 Pliers
6 Tweezers
7 Hexagon wrench (1.5 mm to
6.0 mm)
8 Box driver (5.5 mm)
9 Box driver (7.0 mm)
10 E ring holder (E-2.5)
11 E ring holder (E-4)
12 Head cleaning jig
13 Rubber bush
14 Mini fitting
15 Cleaning liquid
16 Bottle for cleaning liquid (500
ml)
(2) Tools for adjustment
No. Name
1 Personal computer
2 Printer cable
3 Tension gauge
4 Tension gauge
5 Y-axis tension attachment
6 Y-axis tension attachment 2
7 CR gap check jig
8 Flash memory card
9 Loupe (equivalent to 10x)
10 Block gauge (21 mm)
11 Hand glass
12 Double coated media
13 Straight scale (1000 mm)
Rockhopper II series printers – Maintenance Manual
Part code Remarks
Generic product Shaft length should be 250 mm or more.
Generic product Shaft length should be 50 mm or less.
Generic product Generic product For head adjustment, shaft length
150 mm or more
Generic product
Generic product
Generic product
Generic product For head adjustment, etc.
Generic product For exchanging the mainboard
Generic product For exchanging the power board
Generic product JIS E-2.5
IWATA DENKO Co., Ltd.
Generic product JIS E-5
IWATA DENKO Co., Ltd.
JD-30410
JD-42052 Expendable supplies (exchange per using 20 times)
JD-42053 / Maker: Iuchi Seieido Co., Ltd.
Generic product
A29 JD-41844 18l
JD-42054 /
Generic product
Part code Remarks
Generic product Printer port mounted parts
Generic product Amphenol 36P, male connector
Generic product For measuring 5,000g Max.
Reference maker: Oba Keiki Seisakusho
Generic product Max. capacity should be 200 to 500g.
Reference maker: Oba Keiki Seisakusho
JD-42050 For steel belt tension adjustment
JD-42435 For steel belt tension adjustment
JD-42177 For head height adjustment
Generic product Spec.:
4MB Flash Memory Card
Type-II (PCMCIARel.2.1/JEIDAVer.4.2)
5V unique driving spec.
Generic product Generic product For head precision adjustment
Generic product Generic product For cover sensor adjustment
Generic product Generic product For checking the cap trace
Exclusive For adjusting printing accuracy and sensor sensitivity
specified media Maker: Mitsubishi inkjet media
Product number: IJ-MatteCort 143
Other similar media
RJ6-THCCPAPE 137 (MUTOH)
Generic product
262
Exclusive rubber bush, including mini fitting
4 set required per a main unit
Gauge diameter: 4 mm (0.16in.) or less
Gauge diameter: 2 mm (0.08in.) or less
AP-74065, Rev. 1.2, 27/09/04