MUTOH Rockhopper II series Maintenance Manual page 273

8 Warning
Waste INK
Tank
9 Warning
Waste INK
Tank
10 (Warning
Head Life)
The waste tank will
soon be full.
The service life of
the ink tube will
soon be reached.
The service life of
the print head will
soon be reached.
Rockhopper II series printers – Maintenance Manual
(2) Check the ink • Redo the
ID sensor connections of the
connector for the following
contact conditions. connectors :
• Junction board :
J401 – J418
• Mainboard : J133
– J134
(3) The Mainboard • Replace the
may be damaged. Mainboard
assembly.
(1) Check if the • When a message
message is still is displayed : Go to
displayed after step (2)
turning the power
off and then back
on again.
(2) The amount of • Dispose of the
waste ink inside waste ink in the
the tank reached waste bottle.
the specified level.
(3) If initialization • Replace the
does take effect Mainboard
when the waste ink assembly.
is disposed of and
waste ink history is
initialized, the
Mainboard may be
damaged.
(1) Check if the • When a message
message is still is displayed : Go to
displayed after step (2)
turning the power
off and then back
on again.
(2) The number of • Replace the ink
times the ink tube tube.
was used reached • Initializing CR
the maximum motor history.
allowable times.
(3) If initialization • Replace the
does take effect Mainboard
when the CR assembly.
motor history is
initialized after the
ink tube is
replaced, the
Mainboard may be
damaged.
(1) Check if the • When a message
message is still is displayed : refer
displayed after to step (2)
turning the power
off and then back
on again.
274
→ Replacing the
JUNCTION board
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
-
-
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
-
→ Replacing the
steel bearer, tube
guide, CR tape
power cable and
ink tube.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
AP-74065, Rev. 1.2, 27/09/04