1.4. WARNING LABELS
The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached to areas to which attention should be paid. Read and understand the positions
and contents thoroughly.
1.4.1. Handling the operation procedure labels
Notes :
1.4.2. Locations and types of operation procedure labels
The locations of warning labels are shown below.
(1) Front Part
Make sure that all labels can be recognized. If text or illustrations are invisible,
clean or replace the label.
When cleaning labels, use a cloth with water or neutral detergent. Do not use a
solvent or gasoline.
If a warning label has been damaged, lost or cannot be recognized, replace the
label.
Rockhopper II series printers – Maintenance Manual
17
AP-74065, Rev. 1.2, 27/09/04