MUTOH Rockhopper II series Maintenance Manual page 113

o
o
o
Step 11 :
Move the cursor to the opposite side of the origin.
Step 12 :
Cap once.
Step 13 :
Use a mirror to check that the cap does not impinge on the nozzle.
1 = Print head (nozzle face)
3 = Cap trace
Step 14 :
Reinstall all parts in the opposite order of the removal procedure.
50 or 64 inch model: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (2), Cap (d) and Pump (4)
87 inch model 2 heater: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (4), Cap (d) and Pump (2), Cap (e) and Pump (7), Cap (f) and Pump (5), Cap
(g) and Pump (6), Cap (h) and Pump (8)
87 inch model 4 heater: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (4), Cap (d) and Pump (2), Cap (e) and Pump (5), Cap (f) and Pump (7), Cap
(g) and Pump (8), Cap (h) and Pump (6)
50" or 64" Rockhopper II 2 heater
50" or 64" Rockhopper II 4 heater
Rockhopper II series printers – Maintenance Manual
2 = Nozzle
4 = Mirror
114
87" Rockhopper II 2 heater
87" Rockhopper II 4 heater
AP-74065, Rev. 1.2, 27/09/04