5.1. INTRODUCTION
This chapter provides information on the self-diagnosis function.
The self-diagnosis function adjusts the printing accuracy. It is used in the manufacturing process,
adjustment and maintenance.
The self-diagnosis function is implemented in the system firmware. All functions are available from the
operation panel.
Notes :
5.2. PREPARATION
Before you can use the self-diagnosis function, you should make the machine ready and display the self-
diagnosis menu.
5.2.1. Preparations on Machine
Before starting up the self-diagnosis function, perform following preparations:
(1) Setting printing media
Set a roll media for adjustment.
Notes :
(2) Connecting power cable
Connect the power cable to the machine's inlet assembly and insert the power plug into an outlet.
Notes :
5. SELF-DIAGNOSIS FUNCTION
Refer to "Part names and functions ".
Make sure to use coated paper for the adjustment purpose.
Do not connect three or more power plugs to one outlet.
Rockhopper II series printers – Maintenance Manual
137
AP-74065, Rev. 1.2, 27/09/04