Specifications; Introduction; Product Specifications - MUTOH Rockhopper II series Maintenance Manual

3.1. INTRODUCTION

This section explains the specifications, optional parts and supplies, installation
procedures for optional parts, and user support for this printer.

3.2. PRODUCT SPECIFICATIONS

Printers
Technology
Media Thickness Compensation
Maximum Media Widths
Maximum Print Widths
Media Thickness
Diameter / Core
Weight
Colour Channels
Inks
Ink Cassette Capacity / Type
Print Modes & Panel Control Options
Speed Overview Table (
914mm (36") wide output
Ink Set-Up
360 x 360
720 x 360
720 x 720
1440 x 720
1440 x 1440
Output speeds are given for 914 mm (36") output.
50" output is 7 % faster, 64" output is 12 % faster and 87" output is 18 % faster.
For each mode, the minimum (Super High Quality) and maximum speed (Super Draft) are given.
Mode dependent, there are between 2 and 6 speed levels per mode, accessible via print direction selection
and interweave control from the RIP software.
Top speeds indicated are super draft modes and do not guarantee production output quality on all media
types.
Variable Drop Compatible
LCD Display
Take-up System (standard)
Roll Media Core
Interface
Graphics Command Language
50"- model
Drop-on-demand Micro Piezo Inkjet Technology.
Variable drop mass output between 5.4 ng and 41.5 ng
Automatic media thickness compensation.
Variable – RIP controlled – Head Height
Range: 0.08 mm – 1.1 mm
Maximum: 150 mm / 2" & 3" for 50,64 and 3" for 87
Maximum: 50 kg
8 colour channels – 4 or 6 process colour output
Eco-Solvent Plus 2xCMYK speed set-up
Eco-Solvent Plus CMYKLcLm photo tone rendering set-up
220 ml / smart chip ink type & order sensing
Uni & Bi-directional output, Interweaving, Mirror Output, Multi
Copy, Ink Status, Origin Control
*
)
2 x 4 Colours
5.7 – 37.7
5.8 – 22.8
2.9 – 11.4
2.9 – 5.9
1.4 – 2.9
Backlight LED – 4 lines x 20 characters
Automated
2" & 3" for 50 & 64 and 3"" for 87
Centronics, IEEE 1284 compatible / Network, High Speed
Interface (standard high-speed interface card – 4 Mb/s).
RTL-PASS, MH-GL, MH-GL/2
Rockhopper II series printers – Maintenance Manual

3. SPECIFICATIONS

64"- model
1273 mm
1263 mm
50 & 64
6 Colours
2.9 – 19.6
2.9 – 11.5
1.4 – 5.6
1.4 – 2.8
0.7 – 1.5
Fixed Drop Compatible
31
87"- model
1653 mm
1643 mm
87
2 x 4 Colours
5.7 – 37.7
5.9 – 23.1
2.9 – 11.5
3.0 – 6.0
1.5 – 3.0
AP-74065, Rev. 1.2, 27/09/04
2240 mm
2230 mm
6 Colours
3.9 – 27.7
5.3 – 20.6
2.6 – 10.2
2.6 – 5.2
1.3 – 2.6