Counter Initialization Menu - MUTOH Rockhopper II series Maintenance Manual

6.3.2. Counter Initialization Menu

This menu initializes the life counters. The parameters that can be initialized in this menu are as follows.
Diagnosis item
Number of prints
initialization
Ink initialization
Waste ink initialization
Head error reset
Ink ID mask initialization
Total initialization
NVRAM initialization
Timer initialization
Cutter initialization
CR motor initialization
PF motor initialization
Cleaning initialization
Head unit 1 initialization
Head unit 2 initialization
Head unit 3 initialization
Head unit 4 initialization
* Initialize *
PrintNumber
WasteInk
* Initialize *
Ink
NVRAM
* Initialize *
TotalCut
PF motor
* Initialize *
Head Unit 1
Head Unit 3
Description
Initializes the total number of printing counter.
Initializes the ink capacity counter.
Initializes the waste fluid tank service life counter.
Resets critical trouble errors due to over-current flowing the head.
Resets the ink ID mask.
Initializes the service life counter.
Initializes NVRAM.
Initializes the timer.
Initializes the cutter cumulative counter.
Initializes the CR motor service life counter.
Initializes the PF motor service life counter.
Initializes the cleaning wiper service life counter.
Initializes the head 1 nozzle service life counter.
Initializes the head 2 nozzle service life counter.
Initializes the head 3 nozzle service life counter.
Initializes the head 4 nozzle service life counter.
Head error
CR motor
Cleaning
Head Unit 2
Head Unit 4
206
Rockhopper II series printers – Maintenance Manual
Ink ID
(1/4)
All
Timer
(2/4)
(3/4)
(4/4)
AP-74065, Rev. 1.2, 27/09/04