Installing The Job Separator (Option) - Kyocera KM-1650 Service Manual

2DA/2DB
1-3-9

Installing the job separator (option)

<Procedure>
Remove the covers.
1. Open the front cover.
2. Remove the inner cover.
3. Release the fitting parts using a small screw
driver or the like and remove the front side
cover.
4. Remove the screw and the fitting part
located on the right side and then remove
the left front cover.
1-3-30
Figure 1-3-54
Fitting parts
Figure 1-3-55
Left front
cover
Screw
Figure 1-3-56
Inner cover
Front side cover
Fitting part