Kyocera KM-1650 Service Manual page 50

2DA/2DB
Attach the intermediate tray.
12. Loosen the screw located inside of the MFP
by about 3 turns.
* Do not turn the screw too much, otherwise
it may drop in the machine.
13. Hang the hook of the hook holder onto the
screw and then retighten the screw.
Hook holder
14. Insert the intermediate tray from the front
side of the MFP while pushing the hook to
the back and then push the pin located at
the right rear side of the intermediate tray
into the hook holder until the fitting sound is
heard.
Intermediate
tray
1-3-26
3
Screw
Screw
Figure 1-3-45
Hook
Figure 1-3-46
Screw
Hook holder
Pin
Hook
holder