Kyocera KM-1650 Service Manual page 113

2DA/2DB-1
Maintenance
item No.
Adjusting margins for scanning an original from the DP
U404
Description
Adjusts margins for scanning the original from the DP.
Purpose
Used if margins are not correct when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U402 U403
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set using the up/down cursor keys. The selected item is displayed in reverse.
2. Change the setting using the left/right cursor keys.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
Increasing the setting makes the margin wider, and decreasing it makes the margin narrower.
3. Press the start key. The value is set.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.
1. Press the interrupt key. The machine enters the interrupt copy mode.
2. Set the original and press the strat key.
To return to the screen for setting, press the interrupt key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Adjusting the leading edge registration for memory image printing
U407
Adjustment
See page 1-6-17.
1-4-44
U404
Description
Left margin
Leading edge margin
Right margin
Trailing edge margin
Ejection direction
(reference)
DP left margin
(2 ± 1.0 mm)
Figure 1-4-6 Correct margin amount
Description
Setting range
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
DP leading edge margin (3 ± 1.5 mm)
DP trailing edge margin
(2 ± 1.0 mm)
Initial Change in
setting value per step
2.0 0.1 mm
3.0 0.1 mm
2.0 0.1 mm
2.0 0.1 mm
DP right margin
(2 ± 1.0 mm)