Kyocera KM-1650 Service Manual page 122

Maintenance
item No.
Checking the scanner count
U991
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
Press the start key. The screen for the scanner operation count is desplayed.
Display
COPY
FAX
NWS
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Outputting a VTC-PG pattern
U993
Description
Selects and outputs a VTC-PG pattern created in the machine.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output VTC-PG pattern.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the VTC-PG pattern to be output using the up/down cursor keys.
Display
PG1
PG2
PG3
3. Press the interrupt key. The copy mode screen is displayed.
4. Press the start key. A VTC-PG pattern is output.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Description
Description
Scanner operation count for copying
Scanner operation count for fax
Network scanner operation count
PG pattern to be output Purpose
Center line adjustment
Lateral squareness adjustment
Magnification adjustment
-
2DA/2DB
1-4-53