Periodic Maintenance Procedures - Kyocera KM-1650 Service Manual

Periodic maintenance procedures

Maintenance
Section
part/location
Test copy and Perform at the maxi-
test print mum copy size
Maintenance
Section
part/location
Paper feed Paper feed pulley
section
Separation pulley
Forwarding pulley
Drawer paper feed pulley Clean or replace -
Drawer separation pulley Clean or replace -
Drawer forwarding pulley Clean or replace -
Bypass paper feed pulley
Bypass separation pad
Left registration roller
Right registration roller
Registration cleaner
Trans guide film
Feed roller
Feed pulley
Maintenance
Section
part/location
Optical section Slit glass
Contact glass
Mirror 1
Mirror 2 and mirror 3
Lens
Reflector
Exposure lamp
Optical rail
Original size detection
sensor
Method Maintenance cycle
Test copy Every service
Method Maintenance cycle
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace Every 150,000 counts
Clean Every 150,000 counts
Clean or replace Every 150,000 counts
Clean or replace -
Clean or replace -
Clean or replace -
Method Maintenance cycle
Clean Every 150,000 counts
Clean Every 150,000 counts
Clean -
Clean -
Clean -
Clean -
Clean or replace -
Grease -
Clean -
Points and cautions
Points and cautions
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Vacuum.
Clean with the alcohol.
Clean with alcohol or a dry
cloth.
Points and cautions
Clean with alcohol and then a
dry cloth.
Clean with alcohol and then a
dry cloth.
Clean with alcohol and then a
dry cloth only if vertical black
lines appear on the copy image.
Clean with alcohol and then a
dry cloth only if vertical black
lines appear on the copy image.
Clean with alcohol and then a
dry cloth only if vertical black
lines appear on the copy image.
Clean with alcohol and then a
dry cloth only if vertical black
lines appear on the copy image.
Replace if an image problem
occurs or after the exposure
lamp does not turn on.
Check noise and shifting and
then apply scanner rail grease
EM-50E..
Clean with alcohol or a dry cloth.
2DA/2DB
Page
Page
1-6-5
1-6-3
1-6-5
1-6-9
1-6-8
1-6-9
1-6-13
1-6-13
1-6-15
1-6-15
1-6-7
Page
1-6-22
2-4-9