Kyocera KM-1650 Service Manual page 88

Maintenance
item No.
Checking scanner operation
U073
Description
Simulates the scanner operation under arbitrary conditions.
Purpose
To check scanner operation.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be changed using the up/down cursor keys. The selected item is displayed in reverse.
3. Change the setting using the left/right cursor keys.
Display
ZOOM
SIZE
LAMP
Original sizes for each setting in SIZE
Setting
8
9
24
36
39
40
41
4. Press the start key. Scanning starts under the selected conditions.
5. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key when scanning stops. The screen for selecting a maintenance item No. is displayed.
Adjusting the DP input light luminosity
U074
Description
Adjusts the luminosity of the exposure lamp for scanning originals from the DP.
Purpose
Used if the exposure amount differs significantly between when scanning an original on the contact glass and
when scanning an original from the DP.
Method
Press the start key.
Setting
1. Change the setting using the left/right cursor keys.
Description
DP input light luminosity
Increasing the setting makes the luminosity higher, and decreasing it makes the luminosity lower.
2. Press the start key. The value is set.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.
1. Press the interrupt key. The machine enters the interrupt copy mode.
2. Set the original and press the strat key.
To return to the screen for setting, press the interrupt key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Operating conditions
Magnification
Original size
On and off of the exposure lamp
Paper size
A4
B5
11" x 8 "
1/2
A3
B4
A4R
B5R
Setting range
0 to 8
Setting Paper size
42 A5R
47 Folio
52 11" x 17"
53 11" x 15"
55 8
1/2
56 8
1/2
58 5
1/2
Initial setting
0
2DA/2DB
Setting range
100 to 400%
See below.
0 (off) or 1 (on)
" x 14"
" x 11"
" x 8 "
1/2
1-4-19