26. Insert the front and rear hooks of the copy
tray into the front ejection cover and rear
ejection cover each and then attach the
copy tray.
27. Open the staple cover and then insert the
staple cartridge into the staple unit.
28. Close the staple cover.
Operation check
1. Insert the MFP power plug into an outlet and
then turn the power switch on.
2. Select the staple mode and check the staple
operation.
Rear ejection
cover
Copy tray
Figure 1-3-52
Staple cover
Figure 1-3-53
Front ejection cover
Staple cartridge
2DA/2DB
1-3-29