Kyocera KM-1650 Service Manual page 80

Maintenance
item No.
Checking switches for paper conveying
U031
Description
Displays the on-off status of each paper detection switch on the paper path.
Purpose
To check if the switches for paper conveying operate correctly.
Method
1. Press the start key. A list of the switches, the on-off status of which can be checked, are displayed.
2. Turn each switch on and off manually to check the status.
When the on-status of a switch is detected, that switch is displayed in reverse.
Display
EJE
RES
PF2
PF3
BRA
DUP
JOB
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking clutch operation
U032
Description
Turns each clutch on.
Purpose
To check the operation of each clutch.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the clutch to be operated using the up/down cursor keys.
3. Press the start key. The clutch turns on for 1 s.
Display
PF1
PFBYP
FEED1
FEED2
FEED3
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Adjusting the print start timing
U034
Adjustment
See pages 1-6-16 and 18.
Description
Switches
Eject switch (ESW)
Registration switch (RSW)
*2
Drawer feed switch 1 (DFSW1)
*1
Drawer feed switch 2 (DFSW2)
Feedshift switch (FSSW)
Duplex paper conveying switch
Job separator eject switch
Clutches
Paper feed clutch (PFCL)
Bypass paper feed solenoid (BYPPFSOL)
Drawer paper feed clutch 1
Drawer paper feed clutch 2
Drawer paper feed clutch 3
*1
(DUPPCSW)
*1
(JBESW)
*2
(DPFCL1)
*1
(DPFCL2)
*1
(DPFCL3)
2DA/2DB
1-4-11