Copy Default - Kyocera KM-1650 Service Manual

2DA/2DB-1

(3) Copy default

Exposure mode
Selects the exposure mode at power-on.
1. Select [Exposure Mode] and then press the enter
key.
2. Select [Manual] or [Auto] and then press the enter
key.
Original quality
Selects the image quality at power-on.
1. Select [Orig Quality] and then press the enter key.
2. Select [Text+Photo], [Photo] or [Text] and then
press the enter key.
Eco print mode ON/OFF
Determines whether or not the eco print mode will be
the default setting in the initial mode.
1. Select [EcoPrint] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Background color adjustment
Adjust the ground color of the copied paper.
1. Select [Background adjst] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 5
Paper selection
Sets whether the copier will automatically select the
same size of copy paper as the original once an origi-
nal is set, or whether the designated default drawer will
be automatically selected.
1. Select [Paper Select] and then press the enter key.
2. Select [Auto] or [Default cassette] and then press
the enter key.
Paper type (Auto paper selection mode)
Selects the types of paper that will be available for
selection under the APS (Auto Paper Selection) mode.
1. Select [Paper type(Auto)] and then press the enter
key.
2. Select [On] or [Off] and then press the enter key.
3. If selected [On], select the desired paper type and
then press the enter key.
1-4-56
Default drawer
Sets one drawer that will be selected automatically
regardless of the size of paper loaded in that drawer.
1. Select [Default cassette] and then press the entrer
key.
2. Select the drawer that will be used with priority.
Settings: Cassette 1/Cassette 2/Cassette 3/ Cas-
sette 4
*For 16 ppm model, the setting for drawer 2, 3 and
4 will only be available when the optional paper
feeder is installed.
* For 20 ppm model, the setting for drawer 3 and 4
will only be available when the optional paper
feeder is installed.
Default magnification ratio
Sets whether or not the appropriate magnification ratio
to be calculated automatically when selecting the size
of copy paper.
1. Select [Default magnif.] and then press the enter
key.
2. Select [100%] or [Auto %] and then press the enter
key.
Auto exposure adjustment
Adjusts the overall exposure level for the auto expo-
sure mode.
1. Select [Adj.Auto expos.] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 7
Auto exposure adjustment (OCR)
Adjusts the overall exposure level for scanning with
OCR (Optical Character Recognition) software when
using the optional scanner functions of this machine.
1. Select [Auto expos.(OCR)] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 7
Manual exposure adjustment (text+photo mode)
Adjusts the median exposure value when the
text+photo mode is selected for the image quality.
1. Select [Txt+Photo Dens.] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 7