(4) Other electrical components
1.
Paper feed clutch (PFCL) ............................ Primary paper feed from the drawer.
2.
Bypass paper feed solenoid (BYPPFSOL).. Primary paper feed from the bypass tray.
3.
Exposure lamp (EL) ..................................... Exposes originals.
4.
Cleaning lamp (CL) ...................................... Removes residual charge from the drum surface.
5.
Fixing heater M (FH-M)................................ Heats the heat roller.
6.
Fixing heater S (FH-S) ................................. Heats the heat roller.
7.
Fixing thermostat (FTS) ............................... Prevents overheating in the fixing section.
8.
Drawer heater (DH)*
9.
Drawer heater (DH)*
10. Drawer paper feed clutch (DPFCL)*
11. Duplex feed clutch (DUPFCL)*
*1: Optional for 16 ppm model./Standard for 20 ppm model.
*2: Optional.
6
7
5
4
11
2
1
10
Machine front
Figure 2-2-4 Other electrical components
2
................................... Dehumidifies the drawer section.
2
................................... Dehumidifies the drawer section.
1
........... Primary paper feed from the drawer.
2
................... Controls the drive of the duplex feed roller.
3
8
9
Machine inside
2DA/2DB-1
Machine rear
2-2-5