Kyocera KM-1650 Service Manual page 103

2DA/2DB
Maintenance
item No.
Checking the operation of the DP motors and solenoids
U243
Description
Turns the motors or solenoids in the optional DP on.
Purpose
To check the operation of the DP motors and solenoids.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be operated using the up/down cursor keys.
3. Press the start key. The operation starts.
Display
F MOT
C MOT
RJ SL
RP SL
4. To turn each motor off, press the stop/clear key.
Completion
Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is displayed.
Checking the DP switches
U244
Description
Displays the status of the respective switches in the optional DP.
Purpose
To check if respective switches in the optional DP operate correctly.
Start
1. Press the start key.
2. Turn the respective switches on and off manually to check the status.
If the on-status of a switch is detected, the corresponding switch is displayed in reverse.
Display
SET SW
TMG SW
MAT SW
COV SW
REV SW
SZ A SW
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-34
Description
Motors, solenoids and clutch
Original feed motor (OFM)
Original paper conveying motor (OCM)
Switchback feedshift solenoid (SBFSSOL)
Switchback pressure solenoid (SBPSOL)
Switches
Original set switch (OSSW)
DP timing switch (DPTSW)
DP open/close switch (DPOCSW)
DP original cover switch (DPOCSW)
Original switchback switch (OSBSW)
Original size length switch (OSLSW)
Operation In operation
In operation
In operation
On for 0.5 s
On for 0.5 s