Kyocera KM-1650 Service Manual page 135

2DA/2DB
Section Jam code
DP 70
71
72
73
74
75
Finisher 80
81
83
84
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
1-5-6
Description
1
No original feed*
An original jam in the orig-
inal conveying section 1*
An original size error
1
jam*
An original jam in the orig-
inal conveying section 2*
An original jam in the orig-
inal conveying section 3*
An original jam in the orig-
1
inal switchback section*
Jam between the finisher
1
and MFP*
1
Intake jam*
Jam during paper convey-
1
ing for batch ejection 1*
Jam during paper convey-
1
ing for batch ejection 2*
During the primary feed of the second original in the single-
sided or double-sided original mode, even if retry operation is
performed five times, primary original feed is not performed.
During the secondary original feed in the single-sided or dou-
1
ble-sided original mode, the DP timing switch (DPTSW)*
does not turn off within 6500 ms of the original conveying
1
motor (OCM)* turning on.
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)*
does turn off within 750 ms of the original conveying motor
1
(OCM)* turning on.
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
1
1
switch (DPTSW)* does not turn off within 6500 ms of the orig-
inal conveying motor (OCM)*
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
1
1
switch (DPTSW)* does not turn on within 750 ms of the origi-
nal conveying motor (OCM)*
During the switchback operation of an original in the double-
sided original mode, the original switchback switch
1
(OSBSW)* does not turn on within 1300 ms of the original
conveying motor (OCM)*
The paper conveying switch (PCSW)*
1550 ms of the signal requesting paper ejection is output from
the MFP.
During paper intake from the MFP, the paper conveying switch
1
(PCSW)* does not turn off within 1960 to 3480 ms (depend-
ing on paper size) of paper conveying switch (PCSW)*
ing on.
When ejection a stack of paper, the paper conveying switch
1
(PCSW)* does not turn on within 1590 ms of the paper con-
veying motor (PCM)*
When ejection a stack of paper, the paper conveying switch
1
(PCSW)* does not turn off within 2260 to 3190 ms (varies
depending on the paper size) of the paper conveying motor
1
(PCM)* turning on.
Conditions
1
turning on.
1
turning on.
1
turning on.
1
does not turn on within
1
turning on.
1
1
1
turn-