Detaching And Refitting The Drawer Forwarding Pulley And Drawer Paper Feed Pulley (20 Ppm Model Only) - Kyocera KM-1650 Service Manual

(5) Detaching and refitting the drawer forwarding pulley and drawer paper feed pulley (20 ppm model only)

Follow the procedure below to replace the drawer forwarding pulley and drawer paper feed pulley.
Procedure
1. Remove the main body from the paper
feeder (see page 1-6-7).
2. Remove the lower paper feed unit (see page
1-6-8).
3. Remove the drawer rear cover.
4. Remove the stop ring and drawer paper
feed clutch from the machine rear side.
Remove the stop ring and bushing.
5. Remove the screw and then the upper
paper feed unit.
Stop ring
Drawer paper
feed clutch
Bushing
Figure 1-6-13
Upper paper feed unit
Figure 1-6-14
2DA/2DB-1
Stop ring
1-6-9