Kyocera KM-1650 Service Manual page 93

2DA/2DB
Maintenance
item No.
Setting the exposure density gradient
U093
Description
Changes the exposure density gradient in manual density mode, depending on respective image modes (text,
text and photo, photo, text in fax mode, photo in fax mode).
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment. Also used
to make copy image darker or lighter.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the image mode to be adjusted using the up/down cursor keys and press the start key. The
screen for the selected item is displayed.
Display
MIXED
TEXT
PHOTO
FAX TEXT
FAX PHOTO
Setting: Density in text and photo mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Display
MIXED DARKER
MIXED LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in text mode
1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.
2. Adjust the setting using the left/right cursor keys.
Display
TEXT DARKER
TEXT LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
1-4-24
Description
Density in text and photo mode
Density in text mode
Density in photo mode
Density in the text in fax mode
Density in the photo in fax mode
Description
Change in density when manual
density is set dark
Change in density when manual
density is set light
Image density
Dark
Set to LIGHTER
Light
Light Center
Figure 1-4-4 Exposure density gradient
Description
Change in density when manual
density is set dark
Change in density when manual
density is set light
Description
Setting range
0 to 3
0 to 3
Setting: 0
Setting: 3
Set to DARKER
Density adjustment
Dark
Setting range
0 to 3
0 to 3
Initial setting
0
0
Initial setting
0
0