Kyocera KM-1650 Service Manual page 52

2DA/2DB
21. Attach the front ejection cover and rear ejec-
tion cover using the TP bind screw M3 x 06
each.
22. Open the front cover.
23. Attach the staple cover as it is fitted to the
staple unit from the ejection side and then
secure it using the TP bind screw M3 x 06.
24. Attach the inner cover that has been
removed by Procedure 3 to its original posi-
tion.
25. Close the front cover.
Staple cover
1-3-28
Rear ejection cover
TP bind screw
M3 x 06
Figure 1-3-51
Front ejection cover
TP bind screw
M3 x 06
Figure 1-3-50
TP bind screw M3 x 06