Kyocera KM-1650 Service Manual page 112

Maintenance
item No.
Switching between duplex/simplex copy mode
U343
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF using the up/down cursor keys. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Setting preheat/energy saver mode
U344
Description
Changes the control for preheat/energy saver mode.
Purpose
According to user request, selects which has priority, the recovery time from preheat or energy saver.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select control mode using the up/down cursor keys. The selected item is displayed in reverse.
Display
ENERGY STAR
GEEA
Initial setting: ENERGY STAR (for the inch specifications)
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Setting the value for maintenance due indication
U345
Description
Sets when to display a message notifying that the time for maintenance is about to be reached, by setting the
number of copies that can be made before the current maintenance cycle ends. When the difference between
the number of copies of the maintenance cycle and that of the maintenance count reaches the set value, the
message is displayed. This maintenance mode is effective for only Japanese specification.
Adjusting margins of image printing
U402
Adjustment
See page 1-6-20.
Adjusting margins for scanning an original on the contact glass
U403
Adjustment
See page 1-6-37.
Description
Duplex copy
Simplex copy
Control in preheat mode
STAR The fixing control temperature is lowered by 20
forced stabilization is performed 30 seconds after exiting preheat.
The fixing control temperature is lowered by 15
stabilization is performed 30 seconds after exiting preheat.
GEEA (for the metric specifications)
Description
2DA/2DB-1
° °
C/68 F and
° °
C/59 F and forced
1-4-43