Kyocera KM-1650 Service Manual page 107

2DA/2DB
Maintenance
item No.
Switching between double and single counts
U253
Description
Switches the count system for the total counter and other counters.
Purpose
According to user (copy service provider) request, select if A3/11" x 17" paper is to be counted as one sheet
(single count) or two sheets (double count).
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select double or single count using the up/down cursor keys. The selected item is displayed in reverse.
Display
SINGLE COUNT
DOUBLE COUNT (A3/LEDGER)
DOUBLE COUNT (B4)
Initial setting: DOUBLE COUNT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Turning auto start function on/off
U254
Description
Selects if the auto start function is turned on.
Purpose
Normally no change is necessary. If incorrect operation occurs, turn the function off: this may solve the prob-
lem.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select either ON or OFF using the up/down cursor keys. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-38
Description
Description
Single count for all size paper
Double count for A3/11" x 17" paper only
Double count for B4 size or larger
Description
Auto start function on
OFF Auto start function off