Kyocera KM-1650 Service Manual page 104

Hide thumbs Also See for KM-1650:
Table of Contents

Advertisement

Maintenance
item No.
Checking messages
U245
Description
Displays a list of messages or graphics on the operation panel.
Purpose
To check the messages or graphics to be displayed.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be displayed using the up/down cursor keys.
3. Press the start key. The selected item is displayed.
Display
Check display messages
Check display graphics
Method to display the messages
1. Change the screen using the up/down cursor keys to display each message one at a time.
You can select the language using the left/right cursor keys.
2. To return to the screen for selecting an item, press the stop/clear key.
Method to display the graphics
1. Change the screen using the up/down cursor keys to display each graphic one at a time.
You can select the background (black or white) using the left/right cursor keys.
2. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Setting the finisher
U246
Description
Adjusts the side registration cursor stop position in the staple sort mode.
Purpose
To adjust when registration is not proper or staple position is shifted in the staple sort mode.
Setting
1. Press the start key.
2. Select the desired cursor position using the up/down cursor keys. The selected item is displayed in
reverse.
3. Change the setting using the left/right cursor keys.
Display
FRONT
REAR
END
4. Press the start key. The value is set.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Description
Check the messages
Check the graphics
Description
Front side registration cursor stop position
Rear side registration cursor stop position
Trailing edge registration cursor stop position
Description
Setting range
0 to +8
0 to +8
0 to +8
2DA/2DB
Initial setting
4
4
4
1-4-35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-2050

Table of Contents