Detaching And Refitting The Fixing Thermostat; Detaching And Refitting The Fixing Thermistor - Kyocera KM-1650 Service Manual

(6) Detaching and refitting the fixing thermostat

Follow the procedure below to replace the fixing thermostat.
Procedure
1. Remove the fixing unit and separate the fix-
ing right unit and left unit (see pages 1-6-43,
45).
2. Remove the heat roller (see page 1-6-48).
3. Remove the two screws holding the fixing
thermostat and then the thermostat.
4. Replace the fixing thermostat and refit all
the removed parts.

(7) Detaching and refitting the fixing thermistor

Follow the procedure below to replace the fixing thermistor.
Procedure
1. Remove the fixing unit and separate the fix-
ing right unit and left unit (see pages 1-6-43,
45).
2. Remove the heat roller (see page 1-6-48).
3. Remove the screw holding the fixing ther-
mistor and then the thermistor.
4. Replace the fixing thermistor and refit all the
removed parts.
Fixing thermostat
Figure 1-6-88
Fixing thermistor
Figure 1-6-89
2DA/2DB-1
1-6-49