Kyocera KM-1650 Service Manual page 138

Problem
(6) Check if the drawer paper
A paper jam in the
feed clutch 3*
paper feed section is
tions.
indicated during
Electrical problem with the
copying (no paper
drawer paper feed clutch
feed from the drawer
3*
4).
Jam code 14
(7) Broken registration switch
A paper jam in the actuator.
paper feed section is
Defective registration
indicated during
switch.
copying (misfeed in
vertical paper con-
veying 1).
Broken drawer feed switch
Jam code 15
1*
Defective drawer feed
switch 1*
Broken drawer feed switch
2*
Defective drawer feed
switch 2*
Check if the paper feed
clutch malfunctions.
Electrical problem with the
paper feed clutch.
Check if the drawer paper
feed clutch 1*
tions.
Electrical problem with the
drawer paper feed clutch
1*
Check if the drawer paper
feed clutch 2*
tions.
Electrical problem with the
drawer paper feed clutch
2*
Check if the drawer paper
feed clutch 3*
tions.
Electrical problem with the
drawer paper feed clutch
3*
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
Causes/check procedures
1
malfunc-
1
.
2
actuator.
2
.
1
actuator.
1
.
2
malfunc-
2
.
1
malfunc-
1
.
1
malfunc-
1
.
Corrective measures
Run maintenance item U032 and select the drawer paper feed
clutch 3 to be turned on and off. Check the status and remedy if
necessary.
Check.
Check visually and replace registration switch if its actuator is bro-
ken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of the corre-
sponding switch is not light.
Check visually and replace drawer feed switch 1 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 1 on
and off manually. Replace drawer feed switch 1 if indication of the
corresponding switch is not light.
Check visually and replace drawer feed switch 2 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 2 on
and off manually. Replace drawer feed switch 2 if indication of the
corresponding switch is not light.
Run maintenance item U032 and select the paper feed clutch to
be turned on and off. Check the status and remedy if necessary.
Check (see page 1-5-35).
Run maintenance item U032 and select the drawer paper feed
clutch 1 to be turned on and off. Check the status and remedy if
necessary.
Check.
Run maintenance item U032 and select the drawer paper feed
clutch 2 to be turned on and off. Check the status and remedy if
necessary.
Check.
Run maintenance item U032 and select the drawer paper feed
clutch 3 to be turned on and off. Check the status and remedy if
necessary.
Check.
2DA/2DB
1-5-9