Show Port Self-Loop-Discovery Command; Show Module Command - Avaya P333T User Manual

Show port self-loop-discovery Command

Use the show port self-loop-discovery command to display which port or
module has an enabled IBM token ring discovery status
The syntax for this command is:
show port self-loop-discovery [module num/port number]
Example:
Cajun_P330-N> show port self-loop-discovery 1/5
Self-Loop-Discovery is enabled on port 1/5.

Show module Command

Use the show module command to display module status and information. For
each module with an expansion sub-module installed, both module and sub-
module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
mod_num
Example:
Cajun_P330-N> show module
Mod Type
--- ---------- ----- ---------- --- ----- --------
1 CajunP333T
Mod Sub-Type
--- ------------------- --------- -------
1 CajunX330S2
Output Fields
Field
Mod
Module-Type/Sub-Type
Avaya P333T User's Guide
(Optional) Number of the module. If you do not specify a
number, all modules are shown.
Ports Serial-Num C/S Sw
24 4171661 1.1 3.0.5
Sub-Ports Sub-C/S
2
Description
Module number
Module Type/Expansion sub-module type
Chapter 6 Cajun Campus CLI – Layer 2
Boot Ver
2.4.4
1.1
53