Om Configuration; Mimic Options; Cct Options; Set Volume Level - Menvier Security TS2500 Installation & Programming Manual

TS2500 Installation Manual

OM Configuration

This option allows the engineer to define which ward
and circuit status information is sent to the control panel
output module port.

Mimic options

The mimic options allow you to define which ward
related data is sent to the output module port.

CCT options

The circuit options allows you to define which circuit
related data is sent to the output module port.
7
Engineers menu 4
OM Configuration
1, Mimic options
2, CCT options
1
00 Mimic Wrd A-H
Bell-SAB
A C
2
Mimic option 1
Start at
Enter circuit No.
Mimic option 1
& End at
Enter circuit No.
Repeat for remaining
OM Configuration Flowchart

Set Volume Level

This option allows the engineer to adjust the volume
level of the control panel speaker output.
Engineers menu 4
8
Set volume level
Volume level >16
>>>>>>>>
A C / to increase & decrease
sound level or enter value.
Set Volume Level Flowchart
[4-7]
[
B To toggle
YES
YES/NO
/ to scroll
0001
[
1008
[
options
]
[4-8]
[
[

Edit Quick Keys

This options allows the engineer to configure the [A], [B]
and [C] keys on the remote keypads to perform set
functions. For example, key [A] could be programmed
to follow part set group 1, whereas key [B] could be
programmed to follow part set group 8.
Once defined the quick keys do NOT require the user to
enter their passcode, they simply press the relevant
"Quick Set Key" and the system will perform the function
assigned to that key.
Engineers menu 4
9
Edit quick keys
Quick set key A
is DISABLED
A,B,C to select Quick Key
1-9 to select Part Set Group
0 = Disabled
Quick set key A
will use group 4
Edit Quick Keys Flowchart

Engineers Wards

This option allows the engineer to select wards as
"Engineer Wards". When a ward is selected as an
"Engineer Ward" all circuits within that ward are NOT
monitored whilst the engineer is logged on. If the ward is
subsequently set whilst the engineer is still logged on the
monitoring of circuits within that ward is resumed. The
engineer cannot select a ward that is currently set. This
feature allows parts of the system to be disabled and
other parts to be kept live when an engineer is logged
on.
Engineers menu 4
A
Engineer wards
Ignore alarms in
*,*,.,.,.,.,.,.
1-8
A-C To Scroll wards A-H
and wards I-P .
Ward Status Key
* = Ward not selected.
. = Ward not available.
A-P = Wards selected.
Engineer wards Flowchart
Engineers Menu 4
[4-9]
[
[4-A]
[
Wards
Toggle wards.
[
83