Circuit Text - Menvier Security TS2500 Installation & Programming Manual

Engineers Menu 3

Circuit Text

Each detection circuit can have up to 16 characters of
text assigned to it.
When you have selected the circuit that you require to
program, the system will give you the following options:
1 Edit
The edit option allows you to edit text that has
been previously programmed or to create new
text using the text editing keys.
2 Library
The library option allows you to choose a phrase
from the circuit text library, once the phrase has
been selected you can further edit it, if required.
Loading Bay Door
Cursor
^ircuit 0001
Use keys to edit circuit text
64
[3-6]
Engineers menu 3
6
Circuit text
Loading Bay Door
Circuit 0001
Enter circuit number
or use
1,Edit 2,Library
3,Delete 4,Paste
1 =Edit text
Access
Phrase 001
Enter library phrase
or use
Admin office
^ircuit 0001
If required, use keys to
edit circuit text
[
Circuit text Flowchart
3 Delete
The delete option erases the circuit text for the
selected circuit.
4 Paste
The paste option will paste the last programmed
circuit text into the selected circuit. For example if
you program circuit 0001 to "Roller Door 1", then
select circuit 0002 and choose the paste option,
circuit 0002 will also be programmed as "Roller
Door 1". After selecting the paste option you are
giving the option to edit the pasted text, so in the
above example it would be simple case of
changing the "1" to a number "2" etc.
[
Circuit Text
Circuit number
A C / to scroll
[
2 = Library
A C / to scroll
[
[
TS2500 Installation Manual
3 = Delete 4 = Paste
Loading Bay Door
^ircuit 0001
Use keys to edit circuit text
[