Log Event Codes - Menvier Security TS2500 Installation & Programming Manual

TS2500 Installation Manual

Log Event Codes

Event
—- NO EVENT —- No event
#### ACTIVATED Monitored circuit activated
#,## LEC LOST Network #, device No. ## is a LEC that has been removed
### LEC or REM'S The number of LEC or REM's logged on to system after a re-learn
#,## NODE ADDED Network #, device No. ## is a TS900 Node that has been added to the system
#,## NODE LOST Network #, device No. ## is a TS900 Node that has been removed
### NODE'S The number of TS900 Nodes logged on to the system after a re-learn
### XNODE'S The number of XNodes logged on to the system after a re-learn
#### OFF TEST Circuit number #### taken off test
#### OMITTED Circuit number #### omitted
#### REINSTATED Circuit number #### reinstated
#,## REM ADDED Network #, device No. ## is a remote keypad that has been added to the system
#,## REM LOST Network #, device No. ## is a remote keypad that has been removed
#### SHUNTED Circuit number #### shunted
#,## XNODE ADDED Network #, device No. ## is a XNode that has been added to the system
#,## XNODE LOST Network #, device No. ## is a XNode that has been removed
24Hr ALARM #### 24hr alarm from circuit number ####
24Hr OMITTED: 24Hr group omitted in wards:- A - P
24Hr REINSTATED: 24Hr group reinstated in wards:- A - P
24Hr WARDS:- 24hr Alarm on wards:- A - P
ABORT ON WARDS:- Alarm aborted on wards:- A - P
ABORTED ERRORS Remote service errors
ACCESS ### Access passcode ### entered.
ACCESS FAILED Access failed due to code lock in operation
ALARM #### Alarm from circuit number ####
ALARM WARDS:- Alarm in wards:- A - P
AUTOSET # OFF Autoset timer 1-3 off
AUTOSET # ON Autoset timer 1-3 on
AUXILIARY #### Auxiliary alarm from circuit number ####
AUXILIARY # TAMP Auxiliary 1 or 2 tamper
AUXILIARY FUSE Auxiliary Fuse failed
BATTERY FAULT Battery disconnected or voltage level below 9.5V
BATTERY RESTORE Battery restored to healthy condition
BEAM PAIR #### First activation of a beam pair circuit number ####
BELL BOX TAMPER External sounder/bell tamper
BELL TESTED:- Bell tested for wards:- A - P
BELLS ACTIVE:- Bell active for wards:- A - P
CALL ABORTED Remote service call aborted
CALLED No. # Remote service call initiated via panel to remote PC 1, 2 or 3
CALLING BACK No. # Remote service call requested via PC to "Call back No" 1, 2 or 3
CCT ON TEST #### Circuit number #### put on test
CCT TESTED #### Circuit number #### tested during walk test routine
CCTS REINSTATED Circuits reinstated with a shunt code
CIRCUITS SHUNTED Circuits shunted with a shunt code
CODE LOCK # OFF Code lock number # is off
CODE LOCK # ON Code lock number # is on
CODE LOCKED ### User number ### attempted to use their passcode whilst locked-out
Description
Engineer's Menu 2
57