Xnode; Tslec8; Ts900 Id Node; Other Devices - Menvier Security TS2500 Installation & Programming Manual

TS2500 Installation Manual

XNode

The XNode provides eight programmable detection
circuits, two programmable outputs (one switched +ve
and one switched -ve) and a loudspeaker output for
driving a 16 Ohm loudspeaker. Each XNode can also
drive up to 4 remote keypads. Up to 16 XNodes can be
connected on any one network.

TSLEC8

The TSLEC8 Local Expansion Card (LEC) is designed to
be fitted inside the control panel it provides 8
programmable detection circuits. The control panel will
accept two TSLEC8s.

TS900 ID Node

The TS900 ID Node can be used as an alternative to the
standard TS900 Node. It provides a single ID Detector
Loop for connection to 30 ID devices and 8
programmable outputs. Several configuration options
allow it to be used on its own or with existing TS900
Nodes.

Other Devices

Printer

A DATAC printer or any standard RS232 printer can be
connected to the control panel to obtain system and
log print-outs.

CPA6.OM Output Module

Each output module provides eight switched -ve
outputs, the output modules can be daisy-chained
together to provide multiples of eight outputs. The
outputs can be used to indicate ward status information
and/or circuit alarm/mimic indications.

DC54/58/58M Digicom and Digi-modem

A 4-channel DC54 or 8-channel DC58 digital
communicator can be plugged onto the control panel
to allow alarm status information to be transferred to a
dedicated Alarm Receiving Centre. The 8 channel
DC58M digi-modem can be plugged onto the control
panel, which functions as a digital communicator and
V21 modem. The modem facility is required when using
the up/down loading feature.

TSNIB Networker Interface Board

A driver and receiver board that allows Nodes or
remotes to be driven up to 3 Km.

Technical Specifications

Control Panel

Part No: TS2500
Supply
230V ±10% 50Hz
Input :
Current: 220mA (normal)
300mA (alarm) with speaker
Power Supply: 1.5A
Standby Battery: 2 x 7.0Ah or 1 x 17Ah
Zones 2 to 1040
Panel Outputs: 1 = voltage free changeover
2 = Switched -ve @500mA
3 = Switched +ve @500mA
4 = Switched +ve @500mA
Digi Outputs 1-8: +ve removed
Source 5mA in 12V condition
Sink 100mA in 0V condition
Speaker Output: 16 Ohms
Bell Trigger: Switched -ve @500mA
Strobe Trigger: Switched -ve @500mA
Dimensions: 384(W) x 312(H) x 95(D) mm
Material: 1.2mm mild steel
Weight: 4.9 Kg
Environment: -10 to 55°C

LCD Remote Keypad

Part No: NETLCD
Display: 32 Character Liquid Crystal
Current: 50mA (normal) 60mA (alarm)
Zones: 2
Output: Switched -ve @100mA
Dimensions: 150(W) x 104(H) x 30(D) mm
Material: 3mm Polycarbonate
Weight: 282g
Environment: -10 to 55°C

Starburst Remote Keypad

Part No: NETSTAR
Display: 8 Character Liquid Crystal
Current: 50mA (normal) 60mA (alarm)
Zones: 2
Output: Switched -ve @100mA
Dimensions: 150(W) x 104(H) x 30(D) mm
Material: 3mm Polycarbonate
Weight: 263g
Environment: -10 to 55°C
System Overview
3