Menvier Security TS2500 Installation & Programming Manual page 43

TS2500 Installation Manual
18 Ward Settling
Activates when the selected ward settling timer is
running.
19 Ward Clear
Activates when the selected ward is clear of faults
when setting, deactivates when the selected
ward has a fault during setting or when ward is
unset.
20 Ward Tamper
Activates when the selected ward detects a
tamper alarm, deactivates when the selected
ward tamper alarm is reset.
21 Ward Reset Req
Activates when the selected ward requires a
"Reset", deactivates when the ward has been
reset.
22 Ward Lock-Out
Activates when a security key is active in the
selected ward, deactivates when the security key
is healthy.
23 Ward Chime On
Activates when any circuit in the selected ward
causes a chime tone.
24 Ward 24hr Omit
Activates when the selected ward has one or
more 24hr circuits omitted, deactivates when the
selected ward has all its 24hr circuits reinstated.
25 Ward Monitor
Activates when a monitored circuit is triggered in
the selected ward and stays active for the
duration of the "Monitor Cct Time".
26 Ward Alm Abort
Activates for the "Abort Duration" when the alarm in
the selected ward has been aborted by the user.
27 Ward Exit Flt
Activates when the selected ward has a fault
during the setting procedure, deactivates when
the fault is cleared.
28 Ward Exit/Ent.
Activates when the selected ward is in entry or exit.
29 Ward Sndr ctl.
Activates when the selected ward is in exit, entry or
alarm.
30 Ward Perimeter
Activates when the selected ward has a Night
Perimeter circuit in alarm, deactivates when the
alarm is reset.
31 Ward Shunted
Activates when the selected ward has one or
more circuit shunted, deactivates when the
circuits are reinstated.
32 Ward Auto set
Activates when the selected high security ward is
unset, deactivates when the high security ward is
set.
Engineer's Menu 1
39