Figure 23: Attaching A Cable To A Mic - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
64
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
CAUTION: Do not let fiber-optic cable hang free from the connector. Do
not allow fastened loops of cable to dangle, which stresses the cable at
the fastening point.

Figure 23: Attaching a Cable to a MIC

Fiber-optic cable
Installing and Connecting an MX104 Router Overview on page 43
Connecting the MX104 Router to Management Devices on page 59
Initially Configuring the MX104 Router on page 65
Copyright © 2014, Juniper Networks, Inc.